Would it be possible to include the following options in order to support use of the AX.25 protocol as used by radio
amateurs on the N900.  This is now useful as we now have support for USB host mode and can connect to radio modem equipment.
My actual intention is to use AX.25 with the DTN package (https://garage.maemo.org/projects/dtn/) and I already have
code in its upstream to support the AX.25 protocol.  I've tried all of this under Diablo on my old N800 but haven't
yet tried anything on Maemo5/N900.

I've not yet looked at degree of the currently configured support for USB/Serial devices in kernel-power but it seems
that at least some of the common ones are covered.

Of course use of modules would be acceptable too.

Cheers,

Darren Long

--- 45.orig/kernel-power-2.6.28/debian/rx51power_defconfig	2010-11-17 19:21:58.000000000 +0000
+++ 45/kernel-power-2.6.28/debian/rx51power_dml_defconfig	2010-11-16 22:05:05.000000000 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.28.10power-omap1
-# Wed Nov 10 10:45:06 2010
+# Tue Nov 16 22:04:52 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -652,7 +652,25 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=y
+CONFIG_AX25_DAMA_SLAVE=y
+# CONFIG_NETROM is not set
+# CONFIG_ROSE is not set
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=y
+# CONFIG_6PACK is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_YAM is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 CONFIG_BT=m

Date: 2013-05-08 15:31
Sender: Pali Rohár

Ok, then closing this bug.

Date: 2013-01-27 21:10
Sender: Darren Long

Sadly not.  My N900 sits in the corner, reminding me of the days
when I thought Nokia were cool.
Thanks for asking though :)

Date: 2013-01-27 20:56
Sender: Pali Rohár

Hello, after two years, do you still need these drivers
in kernel-power?

Date: 2012-03-05 21:23
Sender: Pali Rohár

@Darren Long:
Are you still interest in these modules?

Date: 2010-11-17 19:47
Sender: Darren Long

I should note that I have built v.45 debs with these options,
but I'm not intending to try them just yet as I've not used
kernel-power before and I want to wait a bit until the dust settles
after the U-Boot/PR1.3/USB-Host 'kerfuffle'.